Automatic Microtome Knife Sharpener The Automatic Microtome Knife Sharpener available with us is the mini model of 12 dia. Featured with a glass plate, this sharpener is manufactured using quality-approved raw material procured from noteworthy vendor organizations. In addition to this, we also check the quality of these sharpeners on the basis of various well-defined parameters. Therefore, this assortment of products is widely appreciated for outstanding efficiency and performance. Optional:  Micro Coarse & Fine Abrasive (set of two bottles of 200 gm each)  Spare glass plate Spare knife holder Automatic Microtome Knife Sharpener.

Automatic Knife Sharpener provides a precise, efficient and safe method for honing Microtome Knives upto 140mm in length, equipped with automatic timer 0-60 min. to adjust sharpening time. It ensure a knife edge so perfect that no subsequent strooping is necessary. The knife edge is recodtioned to optimum sharpness which is so major importance to every laboratory, where material are routinely sectioned for microscopic examinations. The transparent plexi glass cover encloses the entire working mechanism and provides a safe dust and gritfree sharpening process. The knife strokes against a high frequency glass honing plate and after three exactly equivalent strokes on one side of knife edge, a cam follower automatically flips the knife and three strokes are honed on other side. It is supplied completely with glass honing plate, coarse & fine abrasives and dust cover.

Automatic Tissue Processor is that only Basket Rotor along with the single Bakelite beaker cover lifts up to change the position on to the next stage of the processing cycle. This is a compact and versatile equipment for staining process atomization from stage one of fixation of tissue and dehydration process to paraffin wax saturation. Glass door with locking arrangement provides easy viewing and safety from tempering. Continuous agitation is provided by rotating S.S. Tissue basket to make process more effective. A superior thermostat maintains desired temperature of wax bath.

Accessories :

1 - S.S. Basket rotor

Tissue basket

24 - S.S. Tissue capsules

10 - 1 litre glass beakers

11 - beaker covers

2 - S.S. Wax baths each fitted with thermostat, 5-24 hrs

Calibrated timing discs

one-notch plier for programming time discs

It works suitably on 220V ac 50Hz single phase

Freezing Microtome  is a very compact and sturdy model of Freezing Microtome having a table clamping device for fixing the instrument to the side of any standard table. It has a feed range from 5-30 microns in step of 5 microns each. Its freezing attachment has a specimen stage of 15mm dia. and a high pressure flexible tubing approx 150cms. for connecting to the Carbon Diaoxide Cylinder. The Microtome razor is a high quality steel knife tested for micro-structures and specially designed for cutting frozen specimens.

Technical Features:-

Freezing stage : 35 mm diameter

Feed range : 5-40 microns

Total feed excursion : 25mm

Accessories Supplied with Equipment:-

Razor 120 mm with back & handle-one

Honing plate-one

CO2 freezing attachment & stage-one

Oilcan-one

Spanner for attachment to CO2 Cylinder-one

Packed in card board box

Without CO2 Cylinder

This fully automatic microtome based on latest technology that functions on ball bearing guides and a microprocessor based control system with following specifications. It incorporates automatic memorization and recovery, a hand wheel which is lockable in any position, high volume trash tank, convenient specimen clamp, disposable embedding cassette clamp and paraffin clamp, safe alarm system, dormancy protection and advanced imported drive system. Smartly located feather touch buttons can control all the functions effortlessly. It can be used for semi-thin to thick sectioning of both soft and hard specimens.

Compatible Embedding Material paraffin, plastic.

The cutting and trimming function can be finished by the control system.

The hand wheel can be locked at any position, so as to ensure the safety of the operation.

The large waste tray can be Exchanged arbitrarily.

Two kinds of the specimen clamp can be changed conveniently, and it has the alarm system.

Two model for section: Manual and automatic, the user can switch arbitrarily.

Four speed of section: 25 circle/minute, 35 circle/minute, 45 circle/minute, 55 circle/minute.

Switch arbitrarily between section and trimming.

Alarm system for horizontal and vertical stock limit, protection system for motor surcharge.

Technical Specifications:

Range of the thickness of slice: 0∼100μm

Range of the thickness of trimming: 0∼100μm

Setting thickness of slice ranges:

   0∼10μm    increment   0,5μm

   10∼20μm   increment   2μm

   20∼100μm  increment   5μm
Horizontal specimen stroke: 26mm

Vertical specimen stroke: 60mm

The retraction of the specimen clamp: 20μm

Orientation of the specimen head: 360°

Minimum setting thickness of slice: 0,5μm

Maximum section of slice: 45×45mm